features single-turn / cermet / industrial / sealed miniature package rotor designed for automatic machine adjust interface withstands harsh environments and immersion cleaning processes tape and reel packaging available rohs compliant* version available for trimmer applications/processing guidelines, click here 3362 - 1/4 ? square trimpot ? trimming potentiometer *rohs directive 2002/95/ec jan. 27, 2003 including annex and rohs recast 2011/65/eu june 8, 2011. ??fluorinert? is a registered trademark of 3m co. speci? cations are subject to change without notice. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. users should verify actual device performance in their speci? c applications. electrical characteristics standard resistance range ......................20 ohms to 2 megohms (see standard resistance table) absolute minimum resistance .................................... 1 % or 2 ohms (whichever is greater) contact resistance variation ........................... 1 % or 3 ohms max. (whichever is greater) adjustability voltage divider ...................... ?.05 % rheostat ................................ ?.15 % resolution ................................... in nite insulation resistance ............... 500 vdc. 1,000 megohms min. dielectric strength sea level................................ 900 vac 80,000 feet ............................ 350 vac adjustment angle ................. 240 ?nom. environmental characteristics power rating (300 volts max.) 70 ? .................................... 0.50 watt 125 ? ....................................... 0 watt temperature range ... -55 ? to +125 ? temperature coef cient ... ?00 ppm/? seal test ......................85 ? fluorinert? humidity .......mil-std-202 method 103 96 hours (2 % tr; 10 megohms ir) vibration ....... 30 g (1 % tr; 1 % vr) shock ......... 100 g (1 % tr; 1 % vr) load life .. 1,000 hours 0.5 watt @ 70 ? (3 % tr; 3 % or 3 ohms, whichever is greater, crv) rotational life .......................200 cycles (4 % tr; 3 % or 3 ohms, whichever is greater, crv) physical characteristics mechanical angle ................. 270 ?nom. torque ............................. 3.0 oz-in. max. stop strength ................. 7.0 oz -in. min. terminals .......................solderable pins weight ....................................... 0.02 oz. marking ....................... resistance code, terminal numbers, manufacturer s model number, style and date code wiper ............... 50 % (actual tr) ?0 % flammability ..........................u.l. 94v-0 standard packaging .....50 pcs. per tube adjustment tool ..............................h-90 product dimensions 1 3 cw clockwise ccw 2 wiper tolerances: 0.25 except where noted (.010) dimensions: mm (inches) 6.60 (.260) adj. cross slot long x wide x deep x 3.84 (.151) .25 (010) 4.70 (.185) 5.46 .38 (.215 .015) .330 (.013) .46 .03 (.018 .001) common dimensions top adjust 3362 13 common dimensions side adjust 3362 13 3362h 3362f 90 5 4.06 .38 (.160 .015) 1 3 2 3362p 3.53 (.139) 3 1 2 3 1 2 3362r 1.02 (.040) 3 1 2 3 1 2 3362u pin marking reversed for style w 3362m 3 1 2 3362s 3 1 2 3362w 1 3 2 3 1 2 3362x 2.54 (.100) 2.77 (.109) .64 (.025) .89 (.035) adj. cross slot long x wide x deep x 2.77 (.109) .64 (.025) .89 (.035) 2.29 (.090) 2.54 (.100) 2.54 (.100) 2.54 (.100) 3.53 (.139) 1.80 (.071) 5.46 .38 (.215 .015) .46 .12 (.018 .005) 2.54 (.100) 2.54 (.100) 1.02 (.040) 1.02 (.040) 1.02 (.040) 2.54 (.100) 2.54 (.100) 2.54 (.100) 2.54 (.100) typ. 6.99 (.275) 6.99 (.275) 6.60 (.260) 3.84 (.151) 5.08 (.200) 4.70 (.185) 4.70 (.185) 3362z 1 3 2 2.54 (.100) 1.02 (.040) 4.70 (.185) 4.70 (.185) 4.70 (.185) 1.22 (.048) dia. 3 plcs. .46 .03 (.018 .001) dia. 3 plcs. typ. .25 (010) typ. *rohs compliant versions available
13 9.93 (.391) 14.63 (.576) 6.71 (.264) 0.46 0.25 (.018 .010) dia. 3 plcs. 3.53 (.139) 0.25 (.010) 2.54 (.100) 5.00 (.197) dia. 7.04 (.277) 3.84 (.151) 5.46 (.215) 2.54 (.100) 2.54 (.100) 4.7 (.185) adj. slot long x wide x deep 4.0 (.157) 0.6 (.024) 1.0 (.039) 3 1 2 tolerances: 0.25 except where noted (.010) dimensions: mm (inches) ?trimpot? is a registered trademark of bourns, inc. speci? cations are subject to change without notice. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device perfor mance may vary over time. users should verify actual device performance in their speci? c applications. 3362 - 1/4 ? square trimpot ? trimming potentiometer how to order 3362 p - 1 - 502 t __ lf model style standard or modi ed product indicator -1 = standard product resistance code optional suf x letter t = knob* packaging designator blank = tube (standard) r = tape and reel (m, u and p pin styles only) a = ammo pack (m, u and p pin styles only) terminations lf = 100 % tin-plated (rohs compliant) blank = 90 % tin / 10 % lead-plated (standard) *knob option is available only in standard tube packaging for terminal styles f, h, p, r and u. consult factory for other available options. standard resistance table resistance resistance (ohms) code 20 200 50 500 100 101 200 201 500 501 1,000 102 2,000 202 5,000 502 10,000 103 20,000 203 25,000 253 50,000 503 100,000 104 200,000 204 250,000 254 500,000 504 1,000,000 105 2,000,000 205 popular distribution resistance values listed in boldface. special resistances available. product dimensions top adjust models 3362f, h, p, r and u are available with a knob for nger adjustment. add suf x letter ??to order code. (??style shown) packaging speci cations side adjust 3362m-1 3 2 1 top adjust 3362u-1, 3362p-1 side view 3362u-1 side view 3362p-1 ref. dia. 3 2 1 all pins in-line on center dimensions: 1000/reel/box 2.54 (.100) mm (inches) all pins in-line on center dimensions: 750/reel 1000/box 2.54 (.100) mm (inches) 12.70 (.500) 7.0 (.275) 22.7 .76 (.893 .029) 18 .76 (.708 .029) 4.0 0.3 (.157 .011) 3.56 .38 (.140 .014) 18 + .76/ -.5 (.708 + .029 -.019) 12.70 + 0.3/ - 0.25 (.500 + .011 -.009) 4.7 (.185) 7.0 (.275) 25.02 .76 (0.985 .030) 12.70 (.500) ref. 18 + 1.0/ - 0.5 (.709 + .039 -.019) 12.7 + 0.3/ -0.25 (.500 + .012/ -.009) dia. 4.0 0.3 (.157 .011) 18 .76 (.708 .029) 2.3 .38 (.090 .014) 4.7 (.185) meets eia speci cation 468. rev. 09/13
|
